Linker Script implementation notes and policy¶

LLD implements a large subset of the GNU ld linker script notation. The LLD implementation policy is to implement linker script features as they are documented in the ld manual We consider it a bug if the lld implementation does not agree with the manual and it is not mentioned in the exceptions below.

The ld manual is not a complete specification, and is not sufficient to build an implementation. In particular some features are only defined by the implementation and have changed over time.

The lld implementation policy for properties of linker scripts that are not defined by the documentation is to follow the GNU ld implementation wherever possible. We reserve the right to make different implementation choices where it is appropriate for LLD. Intentional deviations will be documented in this file.

Symbol assignment¶

A symbol assignment looks like:

symbol = expression;
symbol += expression;

The first form defines symbol. If symbol is already defined, it will be overridden. The other form requires symbol to be already defined.

For a simple assignment like alias = aliasee;, the st_type field is copied from the original symbol. Any arithmetic operation (e.g. + 0 will reset st_type to STT_NOTYPE.

The st_size field is set to 0.

SECTIONS command¶

A SECTIONS command looks like:

SECTIONS {
  section-command
  section-command
  ...
} [INSERT [AFTER|BEFORE] anchor_section;]

Each section-command can be a symbol assignment, an output section description, or an overlay description.

When the INSERT keyword is present, the SECTIONS command describes some output sections which should be inserted after or before the specified anchor section. The insertion occurs after input sections have been mapped to output sections but before orphan sections have been processed.

In the case where no linker script has been provided or every SECTIONS command is followed by INSERT, LLD applies built-in rules which are similar to GNU ld’s internal linker scripts.

Align the first section in a PT_LOAD segment according to -z noseparate-code, -z separate-code, or -z separate-loadable-segments
Define __bss_start, end, _end, etext, _etext, edata, _edata
Sort .ctors.*/.dtors.*/.init_array.*/.fini_array.* and PowerPC64 specific .toc
Place input .text.* into output .text, and handle certain variants (.text.hot., .text.unknown., .text.unlikely., etc) in the presence of -z keep-text-section-prefix.

Output section description¶

The description of an output section looks like:

section [address] [(type)] : [AT(lma)] [ALIGN(section_align)] [SUBALIGN](subsection_align)] {
  output-section-command
  ...
} [>region] [AT>lma_region] [:phdr ...] [=fillexp] [,]

Output section address¶

When an OutputSection S has address, LLD will set sh_addr to address.

The ELF specification says:

> The value of sh_addr must be congruent to 0, modulo the value of sh_addralign.

The presence of address can cause the condition unsatisfied. LLD will warn. GNU ld from Binutils 2.35 onwards will reduce sh_addralign so that sh_addr=0 (modulo sh_addralign).

When an output section has no input section, GNU ld will eliminate it if it only contains symbol assignments (e.g. .foo { symbol = 42; }). LLD will retain such sections unless all the symbol assignments are unreferenced PROVIDED.

When an output section has no input section but advances the location counter, GNU ld sets the SHF_WRITE flag. LLD sets the SHF_WRITE flag only if the preceding output section with non-empty input sections also has the SHF_WRITE flag.

Output section type¶

When an OutputSection S has (type), LLD will set sh_type or sh_flags of S. type is one of:

NOLOAD: set sh_type to SHT_NOBITS.
COPY, INFO, OVERLAY: clear the SHF_ALLOC bit in sh_flags.
TYPE=<value>: set sh_type to the specified value. <value> must be an integer or one of SHT_PROGBITS, SHT_NOTE, SHT_NOBITS, SHT_INIT_ARRAY, SHT_FINI_ARRAY, SHT_PREINIT_ARRAY.

When sh_type is specified, it is an error if an input section in S has a different type.

Output section alignment¶

sh_addralign of an OutputSection S is the maximum of ALIGN(section_align) and the maximum alignment of the input sections in S.

When an OutputSection S has both address and ALIGN(section_align), GNU ld will set sh_addralign to ALIGN(section_align).

Output section LMA¶

A load address (LMA) can be specified by AT(lma) or AT>lma_region.

AT(lma) specifies the exact load address. If the linker script does not have a PHDRS command, then a new loadable segment will be generated.
AT>lma_region specifies the LMA region. The lack of AT>lma_region means the default region is used. Note, GNU ld propagates the previous LMA memory region when address is not specified. The LMA is set to the current location of the memory region aligned to the section alignment. If the linker script does not have a PHDRS command, then if lma_region is different from the lma_region for the previous OutputSection a new loadable segment will be generated.

The two keywords cannot be specified at the same time.

If neither AT(lma) nor AT>lma_region is specified:

If the previous section is also in the default LMA region, and the two section have the same memory regions, the difference between the LMA and the VMA is computed to be the same as the previous difference.
Otherwise, the LMA is set to the VMA.

Overwrite sections¶

An OVERWRITE_SECTIONS command looks like:

OVERWRITE_SECTIONS {
  output-section-description
  output-section-description
  ...
}

Unlike a SECTIONS command, OVERWRITE_SECTIONS does not specify a section order or suppress the built-in rules.

If a described output section description also appears in a SECTIONS command, the OVERWRITE_SECTIONS command wins; otherwise, the output section will be added somewhere following the usual orphan section placement rules.

If a described output section description also appears in an INSERT [AFTER|BEFORE] command, the description will be provided by the description in the OVERWRITE_SECTIONS command while the insert command still applies (possibly after orphan section placement). It is recommended to leave the brace empty (i.e. section : {}) for the insert command, because its description will be ignored anyway.

Built-in functions¶

DATA_SEGMENT_RELRO_END(offset, exp) defines the end of the PT_GNU_RELRO segment when -z relro (default) is in effect. Sections between DATA_SEGMENT_ALIGN and DATA_SEGMENT_RELRO_END are considered RELRO.

The typical use case is . = DATA_SEGMENT_RELRO_END(0, .); followed by writable but non-RELRO sections. LLD ignores offset and exp and aligns the current location to a max-page-size boundary, ensuring that the next PT_LOAD segment will not overlap with the PT_GNU_RELRO segment.

LLD will insert .relro_padding immediately before the symbol assignment using DATA_SEGMENT_RELRO_END.

Table of Contents

Previous topic

Next topic

This Page